Skip to main content

Smart Guard CCTV Security

IP CCTV

IP CCTV Systems & Network Cameras

Network cameras that get power and picture down one cable, with smarter alerts and recording to a network video recorder.

  • 4MP to 4K cameras
  • Power over Ethernet
  • Smart detection
  • NVR recording
CCTV engineer in work uniform installing a bullet camera alongside ceiling dome cameras

In short

What is an IP CCTV system?

An IP CCTV system uses network cameras that send video down an Ethernet cable to a network video recorder (NVR). The same cable usually powers the camera too, which is called Power over Ethernet or PoE. IP cameras give sharper pictures and better detection than older analogue systems.

Part of our CCTV services. Not sure it’s what you need? Ask one of our engineers.

Key facts

Resolution
Typically 4MP up to 4K (8MP)
Cabling
One Cat6 cable per camera with PoE
Recording
Network video recorder (NVR)
Features
Person and vehicle detection, line crossing
HD bullet CCTV camera with infrared night vision on a wall bracket
Network cameras

Why choose IP

Sharper footage, fewer false alarms

IP cameras pick up a lot more detail than old analogue ones. That matters when you zoom into a recording to see a face, a jacket or a number plate. They can also tell a person or a car apart from a branch blowing in the wind.

Every camera has its own network cable, so adding more later is simple. We fit the cables, the PoE switch and the recorder, then test the whole lot together before we hand it over.

  • More detail when you zoom into a recording
  • Fewer false alerts from weather and wildlife
  • Easy to add cameras later on

What’s included

What an IP CCTV installation includes

Here’s what goes into an IP CCTV installation.

Network cameras

Turret, dome and bullet IP cameras, with the resolution to suit each spot.

Cat6 cabling

One data cable to each camera, run neatly and tested.

PoE switch

Powers every camera through its network cable.

NVR recording

Enough storage for the number of days you want to keep.

Smart detection

Person and vehicle detection, line crossing and no-go zones set up for you.

Locked down

Default passwords changed and firmware updated before we leave.

Areas we cover

IP CCTV systems across London

Enfield is our home patch, but we work all over London. These are some of the areas we cover most often.

  • Enfield
  • Barnet
  • Tottenham
  • Islington
  • Camden
  • Westminster
  • City of London
  • Hackney
  • Canary Wharf
  • Stratford
  • Ilford
  • Romford
  • Barking
  • Croydon
  • Kingston
  • Richmond
  • Hounslow
  • Ealing
  • Harrow
  • Wembley

FAQs

IP CCTV systems FAQs

The questions people ask us most. Ring us if yours isn’t here.

Analogue cameras send video down coax cable to a DVR. IP cameras send it down network cable to an NVR. IP usually means a sharper picture, better detection and an easier job when you want to add cameras.

Power over Ethernet. The cable that carries the picture also powers the camera, so there’s no need for a plug socket by each one.

Not always. More megapixels means more storage, and the lens and the position matter just as much. We pick a sensible resolution for each camera.

They can, but we normally fit a separate PoE switch. On bigger systems we keep the cameras on their own network so they don’t slow everything else down.

Request a quote

Get a quote for IP CCTV systems

Send us a few details and we’ll ring you back to book a visit.

  • 4MP to 4K cameras
  • Power over Ethernet
  • Written quotation before work starts

Request a quote

Only your name and phone number are required.